Author Topic: Maytag Clock for MER6770AAB  (Read 1522 times)

Offline dlucas729

  • VIP Member
  • Member Since: Jul 2012
  • Posts: 4
Maytag Clock for MER6770AAB
« on: July 26, 2012, 08:38:55 PM »
Bought refurbished clock.  Confused as to where the wires go. 

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Maytag Clock for MER6770AAB
« Reply #1 on: July 26, 2012, 08:47:02 PM »
Hi,

Don't your refurbished clock look the same as the original? Should just be a matter of transferring the wires from the original clock to the refurbished one.
 
Maytag Range Model Number MER6770AAB uses Clock Assembly Part # 12001661

Here is the service manual for that model. Maybe the wiring diagram will help.
http://appliancejunk.com/forums/index.php?action=downloads;sa=view;down=390
Hope you find our site helpful.

Offline dlucas729

  • VIP Member
  • Member Since: Jul 2012
  • Posts: 4
Re: Maytag Clock for MER6770AAB
« Reply #2 on: July 26, 2012, 08:58:55 PM »
I thought I was mailing it in for repair so I took the old one out.  I labeled the wires went but I have sone doubts.  The orange, tan, blue, and yellow wires.  A black wire coming out of the white block and the black wire with a jumper.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Maytag Clock for MER6770AAB
« Reply #3 on: July 26, 2012, 09:00:25 PM »
Could you post some photos of what your working with?
Hope you find our site helpful.

Offline dlucas729

  • VIP Member
  • Member Since: Jul 2012
  • Posts: 4
Re: Maytag Clock for MER6770AAB
« Reply #4 on: July 26, 2012, 09:59:29 PM »
Try this out

Offline dlucas729

  • VIP Member
  • Member Since: Jul 2012
  • Posts: 4
Re: Maytag Clock for MER6770AAB
« Reply #5 on: August 06, 2012, 10:44:59 PM »
The 1st board was bad.  I had my board repaired.  I studied the board and discovered that it tells you where to place the wires.  Checking the black wires.  Black wire coming out of L1 and goes to L1L and then jumps to L1U.  There is now an L1A that comes from above.  I thought it connected to L1U, but the bottom broil is on all the time.   I did an ohm check with the wires disconnected and the relays are doing what the should.  Upper bake (left 2 relays open and the right 2 closed and ....).   Now what?

 

71003401 Maytag Jenn-Air Range Electronic Control - Clock

Started by AJ

Replies: 1
Views: 4853
Last post April 12, 2013, 11:30:19 AM
by itsastarr
74009213 Maytag Amana Oven Range Clock Oven Control Board

Started by AJ

Replies: 0
Views: 4068
Last post April 21, 2009, 10:02:56 AM
by AJ
31944801 Maytag Amana Oven Clock Control Erciii, Gas

Started by AJ

Replies: 0
Views: 6530
Last post May 02, 2009, 01:45:27 AM
by AJ
71001872 Maytag Jenn-air Oven Range Clock Control

Started by AJ

Replies: 0
Views: 4682
Last post May 19, 2009, 10:37:30 AM
by AJ
74005169 Whirlpool Maytag Oven Clock with Overlay

Started by AJ

Replies: 0
Views: 2441
Last post July 24, 2009, 02:39:23 PM
by AJ
74009223 Maytag Range Clock Oven Control

Started by AJ

Replies: 0
Views: 3683
Last post July 29, 2009, 03:13:45 PM
by AJ