Author Topic: GE draining issue.  (Read 416 times)

Offline Rick32k

  • Technician
  • Member Since: May 2012
  • Posts: 141
  • Country: us
GE draining issue.
« on: May 17, 2013, 10:10:47 AM »
 I'm working on a GE dishwasher MOD:GDWT260R10SS, and the problem with it is that it wasn't draining correctly. It's getting 120V to the drain pump, and the drain hose isn't clogged. Also it's pumping some water just not enough you have to run the drain cycle about three times for it to drain out. the drain pump is rated for 30 OHMS but when I checked it it only had 25 OHMS. So I called the drain pump. I was wondering what you thought about that.i worked on a few maytag washers where the pump was pumping, but it was really slow and it didn't have enough volume or velocity.so I'm thinking its the same thing.

Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1057
Re: GE draining issue.
« Reply #1 on: May 17, 2013, 10:40:10 AM »
Rick, if it does not ohm to spec and the drain line is open. Replace it.

Offline Rick32k

  • Technician
  • Member Since: May 2012
  • Posts: 141
  • Country: us
Re: GE draining issue.
« Reply #2 on: May 17, 2013, 10:48:12 AM »
Yeah that's what I tought too, but I know there's usually a window of a ohm or two.

 

Maytag Dishwasher Not Draining on last Rinse

Started by selectums

Replies: 1
Views: 1975
Last post November 23, 2008, 05:18:55 PM
by Repair-man
GE Triton Dishwasher not fully draining

Started by Cavandish

Replies: 14
Views: 19149
Last post August 01, 2009, 09:37:22 PM
by GuitarMan
Frigidaire Electrolux diswasher not draining

Started by andshealy

Replies: 3
Views: 2051
Last post January 25, 2009, 05:13:52 PM
by theoldstoveguy
whirlpool dishwasher not draining water

Started by john kimble

Replies: 19
Views: 6733
Last post May 23, 2009, 12:55:48 AM
by TJW
WHIRLPOOL QUIET PARTNER 3 DISHWASHER NOT DRAINING

Started by reamal2

Replies: 9
Views: 10125
Last post September 29, 2009, 07:16:03 AM
by Repair-man
Dishwasher not completely draining.

Started by conniewhitmore

Replies: 1
Views: 1885
Last post September 01, 2009, 08:32:21 PM
by Repair-man