Author Topic: Samsung DMT300  (Read 1400 times)

Offline blakergoodson

  • VIP Member
  • Member Since: Jul 2012
  • Posts: 1
Samsung DMT300
« on: July 22, 2012, 09:34:18 PM »

having trouble with a samsung DMT 300, fault code shows faulty low level switch. any clue as to where that switch is located to replace or check? or even how to reset the computer to clear out fault codes. I completely dissassembled the machine and cleaned all sensors, and drain areas, a lot of trash inside but now cant seem to get it to clear out. Any Help would be appreciated. Thanks Blake

Offline AJ

  • Technician
  • Member Since: Jun 2007
  • Posts: 9377
  • Country: us
    • - Appliance Repair
Re: Samsung DMT300
« Reply #1 on: July 23, 2012, 09:21:52 AM »
What is the full model number that is listed on the model/serial number tag that is located on the dishwasher?
What are the digits it displays for the fault code?
Hope you find our site helpful.

Offline aarondesj

  • VIP Member
  • Member Since: Dec 2012
  • Posts: 1
Re: Samsung DMT300
« Reply #2 on: December 24, 2012, 02:38:01 PM »

I'm having the same issue, my dishwasher model is DMT300RFW and the serial is A3HUG9MZB00476D.

I'm getting error code 0E when I run the test.

What can I test next to try and repair the unit?



DMT300 Samsung Dishwasher Service Test Modes & Codes Quick Reference

Started by AJ

Replies: 6
Views: 3888
Last post October 07, 2013, 09:15:48 PM
by AJ
Samsung DMT300

Started by steadybrooker

Replies: 0
Views: 579
Last post April 20, 2013, 11:45:39 AM
by steadybrooker
Samsung DMR78 Dishwasher - 5E error

Started by AJ

Replies: 1
Views: 5939
Last post May 22, 2012, 02:13:02 PM
by bigbuck
General approval of Samsung Appliances and Bosch Dishwasher

Started by justinc25

Replies: 2
Views: 4352
Last post January 01, 2010, 03:09:56 PM
by JWWebster
Samsung dishwasher DMR78AHS/XAC

Started by e.p.

Replies: 6
Views: 7089
Last post July 12, 2011, 01:08:19 PM
by e.p.
tsDMT800RF Samsung Dishwasher Fast Track Troubleshooting

Started by AJ

Replies: 0
Views: 1293
Last post October 07, 2011, 08:03:44 AM
by AJ