FDB2410LDS0 Frigidaire Dishwasher Issue

[221]

Hello

When started I can hear the water entering the dishwasher for a couple minutes, but when it would usually start the washing / rinsing part of the process where the machine makes its usual running noise I hear nothing. No motor running, no water circulating or squirting, nothing. The clock keeps running and the machine never displays an error code. When I open the door the dishes are somewhat wet but it does not look like water has been squirting everywhere, and they are hot. When I cancel the cycle all the water drains back out.

Can someone tell me what I need to check or replace?
FDB2410LDS0

Thank You

[haroldsappliance]

The dishwasher has two motors, one for drain the other for wash. It's call circulation pump. It's a Mickey mouse design. Check for power on the wash pump. It may be faulty.
http://www.repairclinic.com/PartDetail/Circulation-Pump/154859101/1940277?modelNumber=FDB2410LDS0

[221]

How do I check for power on the wash pump?

[haroldsappliance]

There should be a quick disconnect on motor. You may have to lift a plastic locking tab.