Author Topic: GE Profile Side-by-Side Refrigerator Self Diagnostics Test  (Read 5432 times)

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 8928
  • Country: us
    • Buy me a beer through paypal
    • ApplianceJunk.com - Appliance Repair Help
Self Diagnostics

To enter Self Diagnostic mode, both temperature control panel displays must be illuminated. A display can be illuminated by pressing an adjacent temperature adjustment button. When both displays are illuminated, set the freezer and refrigerator temperature settings to 5. Simultaneously press and hold all 4 temperature adjustment buttons for approximately 3 seconds. A flashing 0 in the refrigerator and freezer displays will indicate that the refrigerator is in Self Diagnostic mode.

To perform a self diagnostic test, locate the test in Table 2, Diagnostic Tests.

For temperature control panels with single-digit displays, the COLDER temperature adjustment button will increment the numbers up and the WARMER temperature adjustment button will increment the numbers down. Use the freezer temperature adjustment buttons to enter the test code number in the freezer display. Use the refrigerator temperature adjustment buttons to enter the test code number in the refrigerator display. When a test code has been entered, the displays will flash to confirm the test. Press the HOLD button for 3 seconds to begin the test.

For temperature control panels with 3-digit displays, the COLDER temperature adjustment button will increment the numbers down and the WARMER temperature adjustment button will increment the numbers up. Use the freezer temperature adjustment buttons to enter the test code number in the freezer display. Use the refrigerator temperature adjustment buttons to enter the test code number in the refrigerator display. When a test code has been entered, the displays will flash to confirm the test code. Press any button other than a temperature adjust button to begin the test.

When testing has been completed, do one of the following things:

Enter code 1 5 to completely reset the system.
Enter code 1 6 to exit diagnostic mode. The temperature control panel is reset automatically.
Unplug the refrigerator for at least 10 seconds. Test mode will terminate when the refrigerator is plugged back in.

Test mode will terminate automatically after 15 minutes of inactivity.



Source

31-9072 GE Profile Side-by-Side Refrigerator Service Manual
Hope you find our site helpful.

 

Side by Side Refrigerator - Model: frs6r5embf

Started by Savage702

Replies: 1
Views: 739
Last post June 06, 2012, 04:08:13 PM
by AJ
LG Side by Side Refrigerator Service Repair Manual

Started by AJ

Replies: 0
Views: 3798
Last post May 02, 2008, 12:41:41 PM
by AJ
GE side by side refrigerator

Started by jay2001

Replies: 8
Views: 7944
Last post September 13, 2008, 02:23:10 PM
by Al Capone
Frigidaire Refrigerator side by side (cooling poorly)

Started by morbus

Replies: 3
Views: 3281
Last post November 07, 2008, 03:16:45 PM
by Repair-man
GE side by side Refrigerator and freezer are not cooling.

Started by meamor

Replies: 1
Views: 3849
Last post January 15, 2009, 08:38:18 PM
by JWWebster
Kenmore Coldspot side by side refrigerator

Started by kornbread3

Replies: 1
Views: 3628
Last post March 01, 2009, 07:34:29 AM
by Repair-man