Author Topic: Ge profile dryer model dpsr610eg0wt squeaks  (Read 1358 times)

Offline A1

  • VIP Member
  • Member Since: Jul 2012
  • Posts: 3
Ge profile dryer model dpsr610eg0wt squeaks
« on: July 20, 2012, 08:03:03 AM »
Ge profile dpsr610eg0wt dryer.
The dryer has developed a squeak when drying. Any ideas? Thank you.


Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Ge profile dryer model dpsr610eg0wt squeaks
« Reply #1 on: July 20, 2012, 09:38:33 AM »
These dryers make 2 distinct noises. A scrub noise cause by worn glides and a squeak noise caused by the rear drum bearing.

To replace that bearing you pop the top which could be done by removing screws in the door jamb or using a putty knife to release the top.
Then get the front off and remove the drum. Clean her up and replace the bearing. If the bearing is going out the glides are probably gone also.
Go to youtube and search ge dryer and all kinds of videos are available that show how to do it.
« Last Edit: July 20, 2012, 09:49:58 AM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline A1

  • VIP Member
  • Member Since: Jul 2012
  • Posts: 3
Re: Ge profile dryer model dpsr610eg0wt squeaks
« Reply #2 on: July 20, 2012, 09:50:39 AM »
I would say it's a squeaking noise. How do I check the rear drum bearing?

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Ge profile dryer model dpsr610eg0wt squeaks
« Reply #3 on: July 20, 2012, 10:11:51 AM »
The only way to do it is remove the drum. Their is no shortcut. If you put it off too long the bearing will eat down into the mounting bracket and the squeal will get louder and louder. Till finally the bearing will break and the tub will rub the element and short it out. The motor could then get binded up, overheat, and die.
« Last Edit: July 20, 2012, 10:14:36 AM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline A1

  • VIP Member
  • Member Since: Jul 2012
  • Posts: 3
Re: Ge profile dryer model dpsr610eg0wt squeaks
« Reply #4 on: July 20, 2012, 10:17:24 AM »
Could you give me detailed instructions on how to remove the drum. I have no idea were to start.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Ge profile dryer model dpsr610eg0wt squeaks
« Reply #5 on: July 20, 2012, 10:19:43 AM »
Pop the top first. then get the front off. get the idler loose and lift out the drum.

I did a crappy video between rain showers:


May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

 

ge profile ,harmony model ,electric dryer

Started by tiffngab

Replies: 2
Views: 2487
Last post March 17, 2009, 08:22:35 PM
by JWWebster
GE Profile front load Dryer starts then stops - model DPVH880GJ0WW

Started by bakes44

Replies: 5
Views: 2782
Last post March 17, 2012, 12:28:05 AM
by ApplianceGuru
Kenmore Electric Dryer - Model F60909644

Started by txgal

Replies: 1
Views: 4125
Last post August 07, 2007, 08:21:33 AM
by AJ
maytag dryer model # md 3500 (no heat)

Started by #13

Replies: 5
Views: 6374
Last post December 05, 2007, 07:15:02 AM
by apptech
Kenmore Dryer Model 110.76660100 Heater wires burned

Started by gwilli

Replies: 2
Views: 5815
Last post January 16, 2008, 01:31:15 PM
by JWWebster
Late Model Hotpoint dryer

Started by JWWebster

Replies: 1
Views: 1149
Last post September 11, 2011, 08:19:18 AM
by AJ