Author Topic: fghb2866pp3 not ice not able to enter ice maker diag.  (Read 210 times)

Offline Azee

  • VIP Member
  • Member Since: Dec 2014
  • Posts: 1
fghb2866pp3 not ice not able to enter ice maker diag.
« on: December 21, 2014, 06:15:57 PM »
I have an fridgadair fghb2866pp3 that the ice maker has quit.  It is a flex type and actually still has ice in the tray.  Made sure that the Temps in the diagnostic mode are all good. The doors are closed and have a good seal.  In the menu there are no codes available for the ice maker ie. 52c or 63c.  Kinks like the ice maker is not installed.  Any help would be appreciated
thanks

 

Video: See if your Whirlpool Ice maker infrared optics control is working.

Started by AJ

Replies: 2
Views: 50476
Last post August 01, 2007, 12:21:37 PM
by AJ
ED27DQXB01 Do I need to replace the ice maker?

Started by galen

Replies: 5
Views: 4505
Last post August 27, 2007, 07:47:38 PM
by AJ
Video: Testing - Connect and disconnect a push-in ice maker water fill valve

Started by AJ

Replies: 0
Views: 18614
Last post July 30, 2007, 05:53:38 PM
by AJ
Video: Whirlpool In-Door Ice Maker Fill Cycle

Started by AJ

Replies: 3
Views: 10591
Last post September 23, 2008, 05:37:19 PM
by Al Capone
Video: How to make your Whirlpool ice maker run for testing and diagnostics

Started by AJ

Replies: 10
Views: 47672
Last post April 16, 2013, 10:40:23 PM
by charlenemhj
Kenmore 106.52552100 ice maker problems

Started by philhyde

Replies: 8
Views: 12107
Last post August 16, 2007, 07:33:28 AM
by philhyde