Author Topic: How to replace a Maytag - Amana washer water pump and belt.  (Read 2055 times)

Offline dowens

  • VIP Member
  • Member Since: Jul 2012
  • Posts: 4
I have taken the torx screws off but I cannot for the life of me get the pump off of the motor. Is there a trick to this?

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9428
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: How to replace a Maytag - Amana washer water pump and belt.
« Reply #1 on: July 16, 2012, 08:32:32 PM »
dowens
Why are you removing the pump? Has the pump been leaking?

If the water pump has been leaking it may have rusted up the end of the motor shaft making it difficult to remove the pump.
You may have to pry the pump off the shaft of the motor.
Hope you find our site helpful.

Offline dowens

  • VIP Member
  • Member Since: Jul 2012
  • Posts: 4
Re: How to replace a Maytag - Amana washer water pump and belt.
« Reply #2 on: July 16, 2012, 08:35:09 PM »
I'm sorry (maybe it is not the pump, I'm a complete rookie), I'm trying to remove the thing that is fastened on to the motor by the three torx screws. I am believe I need to do this so that I can put a new belt on (the old one is broken).

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9428
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: How to replace a Maytag - Amana washer water pump and belt.
« Reply #3 on: July 16, 2012, 08:36:03 PM »
downes, what is the model number of your washer?
Hope you find our site helpful.

Offline dowens

  • VIP Member
  • Member Since: Jul 2012
  • Posts: 4

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9428
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: How to replace a Maytag - Amana washer water pump and belt.
« Reply #5 on: July 16, 2012, 09:02:19 PM »
downes,


Your model is exactly as the one shown in this topic.
http://appliancejunk.com/forums/index.php?topic=97.0


I'm sorry (maybe it is not the pump, I'm a complete rookie), I'm trying to remove the thing that is fastened on to the motor by the three torx screws. I am believe I need to do this so that I can put a new belt on (the old one is broken).


The pump has been pointed out in this photo.





If you have the three screws removed then the pump should just pull off unless its stuck on the shaft and in that case you will have to pry it off.
I have seen many of these style pumps leak just enough water to rust up the motor shaft, but not leak enough that anyone ever noticed water on the floor.
Hope you find our site helpful.

Offline dowens

  • VIP Member
  • Member Since: Jul 2012
  • Posts: 4
Re: How to replace a Maytag - Amana washer water pump and belt.
« Reply #6 on: July 16, 2012, 09:04:24 PM »
Yeah, it is that exact one. I am driving myself crazy trying to get it apart. Thanks for your reply.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9428
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: How to replace a Maytag - Amana washer water pump and belt.
« Reply #7 on: July 16, 2012, 09:08:30 PM »
I have split your post into a new topic, your own topic. :)

Can you post some photos of it?
Hope you find our site helpful.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: How to replace a Maytag - Amana washer water pump and belt.
« Reply #8 on: July 16, 2012, 10:48:45 PM »
I take a hacksaw and cut the pump off. Anythang else and you ruin the motor. Just take your time. Been there Done that
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1509
  • Country: us
    • Buy me a beer through paypal
Re: How to replace a Maytag - Amana washer water pump and belt.
« Reply #9 on: July 17, 2012, 12:34:48 AM »
I can usually get them off with a flat pry bar and a 2x4.  Worst case is hammer and chisel.  Be sure you clean all of the rust off the motor shaft or your new pump will leak.

 

How to replace a Maytag - Amana washer water pump and belt.

Started by AJ

Replies: 18
Views: 29998
Last post April 19, 2010, 08:23:29 PM
by JWWebster
27001233 Maytag Amana Washer Water Pump

Started by AJ

Replies: 0
Views: 5690
Last post April 05, 2009, 05:34:31 PM
by AJ
6-2022030 Maytag Amana Washer Water Drain Pump

Started by AJ

Replies: 0
Views: 4218
Last post May 09, 2009, 03:02:28 PM
by AJ
35-6780 Whirlpool Maytag Amana Washer Water Drain Pump

Started by AJ

Replies: 0
Views: 4032
Last post October 18, 2009, 01:05:06 PM
by AJ
Video: How To Replace a Water Pump On A Whirlpool Made Direct Drive Washer

Started by AJ

Replies: 0
Views: 8705
Last post August 10, 2007, 08:42:54 PM
by AJ
Maytag SAV515D Washer how to replace belt

Started by jhernandez1514

Replies: 6
Views: 4008
Last post March 17, 2008, 06:15:02 AM
by Repair-man