Maytag EpicZ washer model no.MHWZ400TQ01

[brad]

Have this Maytag washer model no. MHWZ400TQ01 that starts out ok,fills with water and washes back and forth untill it counts down from 54 to 43.When it gets to 43 it stops and starts to flash F-20 in the display and will not complete the cycle.What do you guys think is going on here and how do I fix it?

[tgoods]

F20 is the machine not detecting a full water fill within a specific period of time.  Check for kinked hoses or plugged inlet screens.  If you have Flood-safe hoses, reset them, or, better yet, throw them away.  Attached is the tech sheet for your model.  Page 11 has the steps to fix your problem.

[brad]

Thank you tgoods for the info and tech sheet,that's just what I needed.Thanks ever so much.

[AJ]

What did you end up finding wrong with this washer?

[brad]

The connector to the pressure switch had come loose

[AJ]

Thanks for the update.