Author Topic: Kenmore Series 80 coupling repair  (Read 4242 times)

Offline DFOK

  • VIP Member
  • Member Since: Apr 2008
  • Posts: 2
Kenmore Series 80 coupling repair
« on: April 25, 2008, 09:33:10 AM »
Hello all, This washer stopped spinning, and the coupling on my washer was in pieces when I turned the machine over. I've ordered the part but can't figure out if I need to remove the cabinet ( or how to remove the cabinet) for repair. The motor assembly is held with two screws attached to clips. Without removing the cabinet I don't think I'll be able to get to the inside screw. Any suggestions?

Model 110.22852100


Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Kenmore Series 80 coupling repair
« Reply #1 on: April 25, 2008, 10:27:33 AM »
What you do is remove the 2 Phillips screws that hold the timer/waterlevel/water temp controls and flip that part upwards console and all. Then the case will come off after you pop the S clips in back and unplug the quick connect. the case just tips forward and a little wiggling later it just comes right off. The pump and motor will then be easily accessible
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9473
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Kenmore Series 80 coupling repair
« Reply #2 on: April 25, 2008, 01:27:45 PM »
Hi,

See if this link helps.

Motor coupler repair guide
Hope you find our site helpful.

Offline DFOK

  • VIP Member
  • Member Since: Apr 2008
  • Posts: 2
Re: Kenmore Series 80 coupling repair
« Reply #3 on: April 25, 2008, 03:55:07 PM »
Thank you both for the help - with a bit of instruction and the attached diagrams it took about half an hour to fix, and that counts the time spent cleaning years of grime from the innards. I'll now have a tall cold beer in your honor!D

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Kenmore Series 80 coupling repair
« Reply #4 on: April 25, 2008, 07:21:30 PM »
Congrats :banana: :cheers: :banana: It's on now!!! Check out the Parkway Buzz!!!!
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

 

Kenmore 80 Series Washer

Started by shawnrconnelly

Replies: 5
Views: 5745
Last post October 25, 2007, 09:46:52 AM
by Pegi
Kenmore 90 Series - No agitation

Started by jastek

Replies: 24
Views: 9697
Last post February 23, 2008, 06:18:42 AM
by whirlpooltech
KENMORE WASHER 60 series

Started by amnesty

Replies: 7
Views: 13735
Last post March 06, 2008, 02:48:23 PM
by JWWebster
kenmore 80 series washer

Started by buddyray

Replies: 2
Views: 6492
Last post April 19, 2008, 06:01:05 PM
by RegUS_PatOff
Kenmore 80 series washer

Started by KenOH98

Replies: 16
Views: 24440
Last post January 01, 2009, 09:28:08 PM
by bal62958
Old Kenmore 80 Series - Just changed coupler, now nothing works

Started by jordan614

Replies: 1
Views: 1940
Last post September 29, 2008, 05:13:19 PM
by JWWebster