I have a 2002 Whirlpool frig with the ice bin on the door and infrared control. The model number of the frig is GD5SHAXLT02
. The original ice maker unit failed due to a cube getting stuck in the blade slots. Without getting too long winded with all the sordid details, here is what I have done so far to try to get this working again; I replaced the whole ice maker assembly, twice !! (Part # 2198597), I replaced the water valve (Part # W10408179), I replaced both optic boards (Part # 4389102), I lowered temp of the freezer and checked to make sure it is in range, I tested the fill tube by jumping ports L and V and water comes out just fine. The optics boards were my last resort, and I really thought that was it, but this unit is doing nothing. It does not cycle and it does not call for water. I have now replaced everything and I still cannot get this thing to make ice. Needless to say, I am beyond frustrated. What could I possibly be missing ? Has anyone ever gone through this ? What else could be causing this to not make ice ? If anyone can shed some light on this, I would greatly appreciate it.