Author Topic: Advantium microwave smart board replacement help needed  (Read 4323 times)

Offline kludge

  • VIP Member
  • Member Since: Jun 2012
  • Posts: 12
Advantium microwave smart board replacement help needed
« on: June 13, 2012, 01:14:41 PM »
I'm replacing my smart board... but the photos of the WB27X10776 (which the GE site says is the correct part for my model) look different than my board.  Mine has more connectors and relays.  Does the replacement board ship with adapter(s) or an instruction sheet that explains how to install it in place of previous versions of the board?

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9389
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Advantium microwave smart board replacement help needed
« Reply #1 on: June 13, 2012, 01:20:31 PM »
GE Microwave Smart Board Part # WB27X10776

The above board looks different then yours?

Quote
Does the replacement board ship with adapter(s) or an instruction sheet that explains how to install it in place of previous versions of the board?

When you click on the photo or part number above it will take you to the parts page.
It does not show that it comes with instructions or adaptors so I would have to say no it don't come with it.

Maybe the replacement part is used in more then one model and has other plugs on the board for the different models.

What is the model number of your microwave?


Hope you find our site helpful.

Offline kludge

  • VIP Member
  • Member Since: Jun 2012
  • Posts: 12
Re: Advantium microwave smart board replacement help needed
« Reply #2 on: June 13, 2012, 01:54:34 PM »
Here's what mine looks like:


Seems I may have leftover plugs. :(

Main thing concering is the second large black relay labeled Lower Heater on the replacement board.  That relay is present on my current sub PCB, but not on the Smart Board.  Not sure if this will work or not.  I went ahead and ordered it.  I guess we'll see...

Offline kludge

  • VIP Member
  • Member Since: Jun 2012
  • Posts: 12
Re: Advantium microwave smart board replacement help needed
« Reply #3 on: June 13, 2012, 01:55:33 PM »
Oh... and my microwave is SCA1001KSS01

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9389
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Advantium microwave smart board replacement help needed
« Reply #4 on: June 13, 2012, 03:08:03 PM »
Oh... and my microwave is SCA1001KSS01

Just check the part number and you are correct, it's part # WB27X10776

Quote
Not sure if this will work or not.  I went ahead and ordered it.  I guess we'll see...

Let us know...
Hope you find our site helpful.

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Advantium microwave smart board replacement help needed
« Reply #5 on: June 14, 2012, 08:14:16 AM »
Here's what mine looks like:
are you sure yours isn't 220v SCA2000  ::)

 

 
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline kludge

  • VIP Member
  • Member Since: Jun 2012
  • Posts: 12
Re: Advantium microwave smart board replacement help needed
« Reply #6 on: June 14, 2012, 10:36:08 AM »
Yes it is a 220V...but the sticker inside the door says SCA1001.  So THATS the problem.  GEeeeeze... :tickedoff:

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Advantium microwave smart board replacement help needed
« Reply #7 on: June 14, 2012, 01:55:08 PM »
 GE imagination at work  :rofl:
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline kludge

  • VIP Member
  • Member Since: Jun 2012
  • Posts: 12
Re: Advantium microwave smart board replacement help needed
« Reply #8 on: June 16, 2012, 08:06:59 AM »
Well I got the correct board in today and installed it...but still no microwave  :(

Again, everything works fine but the magnetron does not come on.  The problem began after a lightning storm, and though we didn't lose power we may have had some surges.

Any ideas?  What components, other than on the smart board, could have been damaged? 

Offline kludge

  • VIP Member
  • Member Since: Jun 2012
  • Posts: 12
Re: Advantium microwave smart board replacement help needed
« Reply #9 on: June 16, 2012, 08:42:45 AM »
Additional info:  I checked the outlet and it's getting 220v.  When I start the microwave I hear a relay click after a second or two, but not the usual hum I hear when the magnetron is on.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9389
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Advantium microwave smart board replacement help needed
« Reply #10 on: June 16, 2012, 08:57:10 AM »
I have never worked on a 220 Volt microwave.
Is this microwave in your home or is this a commercial unit that is in a restaurant or something?
Hope you find our site helpful.

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Advantium microwave smart board replacement help needed
« Reply #11 on: June 16, 2012, 09:08:23 AM »
Is this microwave in your home or is this a commercial unit that is in a restaurant or something?
made for home use.
Just faster and bigger Quartz Halogen cooking lamps
Prior to GE's Tri-vection series
I had one I bought used on eBay.
We didn't like the Advantium controls, too complicated for us and the kids..
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline kludge

  • VIP Member
  • Member Since: Jun 2012
  • Posts: 12
Re: Advantium microwave smart board replacement help needed
« Reply #12 on: June 16, 2012, 09:09:46 AM »
It's in my home....way out in the country, else I would call a repairman.  If I can simply diagnose the failed part, I can replace it.  I downloaded service manual 31-9038, but it really doesn't show any detailed diagnostic procedures.

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Advantium microwave smart board replacement help needed
« Reply #13 on: June 16, 2012, 09:15:35 AM »
what's it not doing ?
 
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline kludge

  • VIP Member
  • Member Since: Jun 2012
  • Posts: 12
Re: Advantium microwave smart board replacement help needed
« Reply #14 on: June 16, 2012, 09:23:02 AM »
Microwaving.  The convection heaters are working, as are the fans, the turntable, lights, controls...everything except it appears the magnetron isn't functioning.  If I could be sure that it's a bad magnetron, and not just a sensor or thermal cut-out, then I would replace it.  If only I could find a manual that had detailed diagnostics I could probably track down the problem.

By-the-way...I really appreciate you guys taking the time to consult with me on a Saturday morning... O0

 

Microwave expert help needed

Started by centralappliance

Replies: 7
Views: 1252
Last post November 11, 2012, 02:02:48 PM
by AJ
GE built-in microwave repair or replacement

Started by ryanbach

Replies: 2
Views: 3812
Last post May 24, 2010, 03:14:47 PM
by JWWebster
Video: GE Spacemaker Microwave Magnetron Tube Replacement

Started by AJ

Replies: 4
Views: 3136
Last post January 29, 2011, 11:47:39 PM
by JWWebster
GE Microwave Turntable Needed

Started by shoeheel

Replies: 5
Views: 1866
Last post August 14, 2011, 09:18:26 PM
by shoeheel
31-9076 GE Advantium 120 Microwave Service Manual

Started by AJ

Replies: 0
Views: 2400
Last post November 09, 2011, 07:10:47 PM
by AJ
GE Oven control board replacement

Started by rwcaston

Replies: 2
Views: 771
Last post September 08, 2013, 07:41:17 PM
by apu