Author Topic: Maytag Washer Noisy During Spin  (Read 1403 times)

Offline TechnicianBrian

  • Technician
  • Member Since: Dec 2007
  • Posts: 390
  • Country: us
    • TechnicianBrian.com
Maytag Washer Noisy During Spin
« on: April 24, 2008, 10:14:55 PM »

Model #SAW5710AWW, this unit would function fine, but was making a creaking noise during agitation that only got worse during the spin cycle. After a bit of an inspection, I removed the tub assembly to get a better look at what was causing the noise, and found a couple cracks at the base of the milk stool. The milk stool holds the entire tub upright and carries all the weight when in use so is subjected to a lot of stresses. This one finally gave up and cracked near the bottom where the parts are welded together. Replaced the milk stool and now this unit sounds as good as it works.




SAW5710AWW
« Last Edit: April 24, 2008, 10:32:21 PM by AJ »

 

Maytag Washer Model mav7600aww, noisy

Started by dex

Replies: 1
Views: 3633
Last post October 31, 2007, 05:50:56 PM
by rickgburton
Maytag washer mah4000aww spin cycle

Started by evo100

Replies: 1
Views: 1839
Last post December 25, 2007, 09:41:02 PM
by AJ
Maytag Neptune Washer - No Spin

Started by AJ

Replies: 6
Views: 4682
Last post February 20, 2008, 12:41:13 PM
by AJ
Maytag washer noise during high speed spin

Started by madbchron

Replies: 2
Views: 1604
Last post February 05, 2008, 10:03:59 AM
by JWWebster
maytag noisy when agitating noise chenges with direction spin quiet

Started by funbiz99

Replies: 9
Views: 3085
Last post March 03, 2008, 08:07:48 PM
by JWWebster
Maytag Washer Spin & Drain Problem

Started by lulubovary

Replies: 1
Views: 1884
Last post March 11, 2008, 04:43:09 PM
by Repair-man