Dynasty Service Repair Manual

[jtnicholson]

I was looking for a service repair manual on DGR366.  Does anyone know where to find it? 

Thanks..

[AJ]

Dynasty?
Never heard of that brand before.

Where do they come from?
Who makes them?

I searched through my collection of service manuals and come up empty.
Maybe another member will have a copy for you.

What's wrong with it?

[JWWebster]

Just from looking at the parts it uses Harper/wyman spark switchs for the top and has a square glowbar. The OEM numbers appear to be maycor. I could be wrong.

[AJ]

I can pull up the model number in the Maytag service library, but no service manual is listed for it.

[jtnicholson]

Yeah I bought a house with this stove.  The oven doesn't turn on, so I'm guessing it is the thermostat but we wondering how to diagnose that.  I found this website below for parts, guess I'll give them a call tomorrow.


http://www.dynastystoves.com

Thanks.

[theoldstoveguy]

I use the 12400035 Maytag ignitors on them, was a Maytag division now owned by Jade. The customer service number is 800-794-5233 . If you try to order parts most companies say no longer available but I have ordered parts and they are very good.

[jtnicholson]

I am seeing a lot of the parts are whirlpool /Maytag.  I'll give that number a call first.  Have you any other experience with this model?  Thanks.

[theoldstoveguy]

I Did Maytag service for over 25 years, I was the service person for most of Sonoma and Marin county for these units.(That's Northern CA.) I have seen more ignitors and blown out burners than any other problems. By blown out burners I mean when you remove the oven bottom look next to the ignitors,If there is a bubble you will see a hole burned in the side of it. That will cause excess heat and burn out ignitors. According to Whirlpool they are no longer made. ( the burners) Contact that number I gave you and they have them, If you know the age they may give a discount on the parts. You can look up parts on the above parts site.
http://www.appliancepartspros.com/partsearch/model.aspx?model_id=47101&diagram_id=28389712#d28389712

[JWWebster]

Seen it. I have added a C clamp or 2 over the hole to temp repair these.