Author Topic: Whirlpool oven RB262PXAB1 too hot, need to adjust temp.  (Read 1025 times)

Offline jmets2000

  • VIP Member
  • Member Since: May 2012
  • Posts: 2
Whirlpool oven RB262PXAB1 running too hot, need to adjust the temp down 10+ degrees. 
Don't have manual on this old dog, usually I can recalc temp with keyboard.
thanks for any info.
jim



Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9249
  • Country: us
    • ApplianceJunk.com - Appliance Repair Help
Re: Whirlpool oven RB262PXAB1 too hot, need to adjust temp.
« Reply #1 on: May 24, 2012, 03:51:02 PM »
Hi,

I have attached a copy of the tech sheet for your model that explains how to calibrate the oven temperature.

If the temperature is to far off to calibrate you may need to replace the oven temperature sensor, part # 12001656

Offline jmets2000

  • VIP Member
  • Member Since: May 2012
  • Posts: 2
Re: Whirlpool oven RB262PXAB1 too hot, need to adjust temp.
« Reply #2 on: May 24, 2012, 04:14:49 PM »
Wow that was quick, thank you.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9249
  • Country: us
    • ApplianceJunk.com - Appliance Repair Help
Re: Whirlpool oven RB262PXAB1 too hot, need to adjust temp.
« Reply #3 on: May 24, 2012, 04:41:08 PM »
 O0

 

Whirlpool Wall Oven not responding to temp change

Started by Earl Dryer

Replies: 14
Views: 5892
Last post November 06, 2008, 10:01:35 AM
by JWWebster
Frigidaire oven temp sensor probe?

Started by jon

Replies: 1
Views: 6141
Last post July 08, 2007, 06:06:26 PM
by AJ
Whirlpool Buit-In Oven - No heat

Started by AJ

Replies: 0
Views: 1802
Last post December 28, 2007, 07:41:25 AM
by AJ
Amana Gas oven won't reach full temp

Started by slick50

Replies: 3
Views: 3240
Last post February 01, 2008, 09:49:57 PM
by slick50
Whirlpool Range No Oven Operation

Started by TechnicianBrian

Replies: 5
Views: 2429
Last post April 24, 2008, 01:32:13 PM
by JWWebster
Whirlpool Oven E1 F2 Error

Started by TechnicianBrian

Replies: 0
Views: 12359
Last post July 11, 2008, 07:59:01 AM
by TechnicianBrian