LG Tromm Washer Gasket Replacement

[jw1976]

Hello all, I am new here and I am about to tackle the job of replacing the washing machine door gasket on my LG Tromm. I need to post the model number, but it is the one with th 3 holes that get clogged and gets all full of mold and mildew. Does anyone have a step by step manual on how to change that out? I have the gasket already, but it sounds like i need some specialty pliers? Thanks in advance!

[JWWebster]

Take your pick

outer tub tool 383EER4001A

[kellonnie]

be sure to also get ther inner tub tool which is more difficult to put on, using the wrong tool for this cost me 13 stitches. also if you have a water bottle with a little bit of dish soap added helps get the gasket on easier.

[JWWebster]

 inner tub tool part # 383EER4004A

[jw1976]

Wow, you guys are great! I just ordered the tools and once they are here I will swap out the gasket. Thanks!

[carlosfj80]

 

[Mettalikatt]

be sure to also get ther inner tub tool which is more difficult to put on, using the wrong tool for this cost me 13 stitches. also if you have a water bottle with a little bit of dish soap added helps get the gasket on easier.

Explain!!

Sent from my DROID RAZR

[JWWebster]

[carlosfj80]

Thank you!!!

[tgoods]

The outer spring tool is unnecessary, just use your knee and both hands.  I haven't done a boot replacement on these yet, so I don't know if the inner spring tool is needed or not.

[scrapiron]

Yeah, you REALLY want that inner spring tool. The tension on that inner spring/wire makes it really difficult to do without the tool. a Vise-grip locking pliers on each end of that spring is another way.

[wildimaginations]

You really need both tools.  The springs are really strong and it's almost impossible to put them on the boot.

[tgoods]

Although I haven't changed any LG door boots, I've had a few front panels off.  I haven't found the front clamp to be any more difficult to install than a Whirlpool clamp.  I hold the left end of the spring in place with my knee.  Then I use both hands to work the wire into place.  Takes maybe 15 seconds.