OK here comes the fun !!
I put the rotor, the bolt with thread lock and excellent , the washer starts to work no more LE code!!
After 2 or 3 minutes guess what!!! the bolt was castrated!!!! holycows !!!
I spend some time extracting the &^%*(*&& piece of the bolt that was left into the shaft.
I put other bolt same size and finally its working again except that.....now the motor is making an strange noise, i already check that rotor be seated perfectly on the shaft and over the stator, I removed and put it again and again and it makes noise.
Do we need use a torque to tight this screw? what pressure? Do we need put threadlock and let 24 hours for cure? IT looks uneven!!! am I seen wrong? I never put the rotor on unsafe place, and never fall down how is this possible? It look to me too heavy all the weight of the wet clothes resting in a poor bolt! what do you think ? welcome any advice, and i do not wish to any of you this nightmare.