Author Topic: KitchenAide FUDC10FXSS1 Won't Start / No LEDs / Does Tone  (Read 154 times)

Offline DFW Guy

  • VIP Member
  • Member Since: Sep 2014
  • Posts: 1
KitchenAide FUDC10FXSS1 Won't Start / No LEDs / Does Tone
« on: September 21, 2014, 08:16:34 AM »
dishwasher is 2 years old, light duty and no prior issues.

contractor was doing some work in the kitchen and asked that i turn off kitchen breakers which i did.  he completed his work which had no direct impact to the dishwasher.  later i attempted to wash a load and the LED panel would not light nor would the dishwasher start.  i do get a tone whenever i close the door.

the breakers are all in the on position.  the tone would suggest i have power.

advice please.
« Last Edit: September 21, 2014, 08:17:04 AM by DFW Guy »

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1513
  • Country: us
    • Buy me a beer through paypal
Re: KitchenAide FUDC10FXSS1 Won't Start / No LEDs / Does Tone
« Reply #1 on: September 22, 2014, 12:57:49 AM »
Check the wiring connection in the junction box. If that checks out, it's probably the thermal fuse, part number W10402110.  Make sure you follow the instructions.

 

Kenmore Elite Dishwasher Does Not Start

Started by rgletter

Replies: 5
Views: 5620
Last post December 14, 2007, 07:45:52 PM
by rickgburton
maytag d/w wont start after board change

Started by BrntToast

Replies: 1
Views: 1961
Last post February 05, 2008, 07:49:19 AM
by AJ
whrilpool dish water does'nt start wash cycle

Started by gary

Replies: 1
Views: 2713
Last post June 17, 2008, 08:25:45 AM
by whirlpooltech
Quick wash and start buttons do not work on dishwasher.

Started by bless

Replies: 1
Views: 1694
Last post May 23, 2012, 10:16:08 AM
by AJ
Door leaks upon cycle start -- KitchenAid

Started by hsf

Replies: 2
Views: 1857
Last post September 29, 2008, 09:06:41 AM
by hsf
665.16023402 kenmore diswasher will not start

Started by daleebz

Replies: 5
Views: 2509
Last post October 11, 2008, 03:46:34 PM
by daleebz