Author Topic: Maytag Neptune washer model MAH8700AWW  (Read 6616 times)

Offline brad

  • VIP Member
  • Member Since: Aug 2007
  • Posts: 207
Maytag Neptune washer model MAH8700AWW
« on: February 03, 2012, 03:08:30 PM »
This Maytag Neptune washer model no MAH8700AWW is having trouble.It will fill,start and wash down to the second rinse ( with 12 on the display) and then just stop.After about 10 minuets it will chime and show WF on the display.If I restart it, it will finish like it is supposed to,but only if I restart it.What do you guys think is going on with this thing,and what do I need to do to repair it?



Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 950
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Re: Maytag Neptune washer model MAH8700AWW
« Reply #1 on: February 03, 2012, 07:33:34 PM »
went to database & been searching for wf error code, sorry i cannot find any wf codes @ all.

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Maytag Neptune washer model MAH8700AWW
« Reply #2 on: February 03, 2012, 07:47:57 PM »
Here is the service manual.

16026126 Maytag 27 Front Load Washer Service Manual

I also could not find anything about WF on the display.
Could be a faulty control board.

Offline brad

  • VIP Member
  • Member Since: Aug 2007
  • Posts: 207
Re: Maytag Neptune washer model MAH8700AWW
« Reply #3 on: February 03, 2012, 08:11:43 PM »
Thank you guys for the replies and the service manual,I'll read thru it.Thanks again

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Maytag Neptune washer model MAH8700AWW
« Reply #4 on: February 03, 2012, 08:15:10 PM »
Maybe another tech will have something to add.
In any case please let us know what you end up doing with it.

Offline schaffersapplian

  • Technician
  • Member Since: Oct 2008
  • Posts: 619
  • Country: us
  • Every action has a reaction
    • Facebook
Re: Maytag Neptune washer model MAH8700AWW
« Reply #5 on: February 04, 2012, 08:58:17 AM »
I also have never seen a WF code.   Most common stuff on this washer is 2E/3E errors-issue with motor circuit,  Shaking, and No drain/poor drain-Usually a restriction in the drain pump.   You can get into a diagnostic mode on this machine. I have always found it very handy to diagnose the machine.  I personally own one of these washer's!   Keep us posted
Authorized Samsung, Electrolux, Whirlpool, GE, Fisher Paykal, and Maytag Servicer with over 10 years experience.

Offline brad

  • VIP Member
  • Member Since: Aug 2007
  • Posts: 207
Re: Maytag Neptune washer model MAH8700AWW
« Reply #6 on: February 05, 2012, 06:06:51 AM »
When it starts up,it starts,fills,washes,rinses the first time all ok.But when it gets down to the second rinse it just stops.I can hear the water valve,but little or no water comes into the machine,This will go on for about 10 minuets and then it will display the code (might be a nF code)If I restart it,it will fdinish up just fine.

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Maytag Neptune washer model MAH8700AWW
« Reply #7 on: February 05, 2012, 03:30:54 PM »
Are both water supply valves turned on?
Take a Kid fishing.

Online theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1247
  • Country: us
    • Buy me a beer through paypal
Re: Maytag Neptune washer model MAH8700AWW
« Reply #8 on: February 05, 2012, 05:21:29 PM »
How is the cold water fill ?  Try it from the start of the cycle on a cold fill. May be a plugged screen in valve or hose.

Offline brad

  • VIP Member
  • Member Since: Aug 2007
  • Posts: 207
Re: Maytag Neptune washer model MAH8700AWW
« Reply #9 on: February 05, 2012, 07:26:55 PM »
Both water valves are on and the screens are clean on each hose.It fills fine on start up.

Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 950
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Re: Maytag Neptune washer model MAH8700AWW
« Reply #10 on: February 06, 2012, 09:04:23 AM »
Sounds like a valve is bad

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9297
  • Country: us
    • ApplianceJunk.com - Appliance Repair Help
Re: Maytag Neptune washer model MAH8700AWW
« Reply #11 on: May 21, 2012, 06:12:35 PM »
What did you ever find wrong with this washer?
Hope you find our site helpful.

 

Maytag Neptune Front-load Washer Smoking (MAH8700AWW)

Started by jrossano

Replies: 7
Views: 3114
Last post October 16, 2012, 06:32:33 AM
by tgoods
Maytag MAH8700AWW Neptune Front Load Washer with dreaded ND

Started by dlachermeier

Replies: 2
Views: 3270
Last post November 08, 2012, 10:34:25 AM
by dlachermeier
maytag Neptune model #mah8700aww. blows circuit immediately??? please help

Started by thebear

Replies: 2
Views: 303
Last post May 02, 2014, 01:37:01 PM
by Bailey
Maytag Neptune washer MAH4000AWW

Started by Sue

Replies: 8
Views: 6942
Last post February 09, 2013, 07:41:01 AM
by def
Maytag Washer Model mav7600aww, noisy

Started by dex

Replies: 1
Views: 4228
Last post October 31, 2007, 05:50:56 PM
by rickgburton
Maytag Neptune Washer - No Spin

Started by AJ

Replies: 6
Views: 5425
Last post February 20, 2008, 12:41:13 PM
by AJ