Join us on facebook and become a fan, http://facebook.com/appliancejunk
Tag Archive for 'Whirlpool'
South Dakota residents have already claimed more than half of South Dakota’s energy-efficient appliance rebate money.
The stimulus-funded program encourages residents to replace old appliances with more efficient models.
As of this past week, rebate applications totaled more than $392,000 for around 3,500 appliances. Clothes washers, refrigerators and dishwashers have been the most popular replaced appliances.
Nearly $350,000 remains available.
The program ends when the funds run out.
TESTING THE PLUG-IN SURFACE ELEMENT
1. Set the ohmmeter to the R x 1 scale. 2. With the element removed, touch the meter leads to ends of the prongs.
The meter should indicate the following (approximate ±20%) resistance for the indicated element:
8 ” Element = 18 – 20 Ω
6 ” Element = 30 – 33 Ω
| Blog | Forum | Contact | Gallery | Manuals | Privacy | Stats |
| ApplianceJunk.com™ © 2007-2010, AJ Enterprises LLC |
TESTING AN OVEN TEMPERATURE SENSOR
1. Set the ohmmeter to the R x 10 scale.
2. Touch the meter leads to the plug pins (see the illustration).
The meter should indicate approximately 1100 Ω at 75 ˚F. For resistances at other temperatures, refer to the chart below.
NOTE: The readings are approximate.
| Blog | Forum | Contact | Gallery | Manuals | Privacy | Stats |
| ApplianceJunk.com™ © 2007-2010, AJ Enterprises LLC |
TESTING AN INFINITE SWITCH (ELEMENT CONTROL)
1. Set the ohmmeter to the R x 1 scale. 2. With no power applied, disconnect the wires from the control terminals.
Turn the control to the “HI” setting, and you should obtain continuity readings between the following terminals:
L1 and P
L1 and H1
L2 and H2
| Blog | Forum | Contact | Gallery | Manuals | Privacy | Stats |
| ApplianceJunk.com™ © 2007-2010, AJ Enterprises LLC |
The illustration shows the location of the major components in the electric range.
| Blog | Forum | Contact | Gallery | Manuals | Privacy | Stats |
| ApplianceJunk.com™ © 2007-2010, AJ Enterprises LLC |
defrost adaptive control refrigerator
Maytag Refrigerator Adaptive Defrost Control Board
Adaptive DefrostGE Profile Side by Side
GE Refer How do you initiate defrost?
Maytag Refrigerator Stopped Working
When are the Manufacturer’s going to wake up?
| Blog | Forum | Contact | Gallery | Manuals | Privacy | Stats |
| ApplianceJunk.com™ © 2007-2010, AJ Enterprises LLC |






