Microwave Turntable

Microwave Turntable

REMOVING THE TURNTABLE MOTOR

1) Remove the turntable and rotating ring.

2) Lay the unit down on its back.

3) Remove the turntable motor cover.

4) Disconnect the leadwire from the turntable motor terminals.

5) Remove the screw securing the turntable motor to the oven cavity ASSEMBLY.

6) After repairing the motor, rotate the removed turntable motor cover.

7) Fit the turntable motor cover’s projecting part to the base plate slit.

NOTE:

1. Remove the wire lead from the turntable motor VERY
CAREFULLY.

2. Be sure to grasp the connector, not the wires, when
removing.