Wolf oven will NOT heat

Wolf R364G Gas Range would not light. With a turn of the knob the indicator bake light comes on but nothing else happens NO heat .. The customer needed her oven to bake a large Thanksgiving turkey .  Time to call for service.

With a non-contact voltage detector I check for voltage to the igniter.  The blinking light indicates that I have voltage to the igniter.  With no glow at all, It was time to replace the Bake Igniter PN# 813541. Turned the knob to off and switched the breaker to the off position to cut the power to the range.  I removed two screws that hold on the burner plate. Also removed two screws that hold the gas orifice. Then removed two more screws hold the burner in place removed them. slid the burner over to the left to get access to the two screws that hold the igniter to the burner. Removed the two screws and the igniter. Installed the new Bake igniter PN# 813541 then replaced the burner, gas orifice and burner plate screwed them all back together.  With a 16 gauge insulated crimp-on butt connector I stripped and crimped one of the igniter wire. The other wire was replace off of the gas valve .

(Tools Used)

(Time)
20 Minutes